Tag: crowd supply

ANAVI Miracle Controller Successfully Crowdfunded!

Hip hip hooray! The crowdfunding campaign of ANAVI Miracle Controller at Crowd Supply was successful. It ended on 5 February 2020. We met all stretch goals.

ANAVI Miracle Controller is an ESP8266-powered Wi-Fi dev board to control two 5 V or two 12 V addressable (digital) LED strips like WS2812B, WS2812, WS2811, etc. Furthermore, mini OLED display and up to 3 I2C sensors can be attached. It has been certified by the Open Source Hardware Association.

We have already started manufacturing. The first and second batches of boards are ready. Right now we are testing and packaging them. The estimated shipping date remains the same – Mar 30, 2020. In the meantime you can still place pre-orders at the same prices. Crowd Supply will take care of the shipping for all orders placed during the crowdfunding campaign and pre-orders.

You may also like

HackSpace Magazine Covered ANAVI Miracle Controller

HackSpace is a monthly magazine for makers. We are very proud that issue 27 for February 2020 covered our open source hardware ANAVI Miracle Controller in section “Crowdfunding now”. You can buy HackSpace issue 27 or download it as a PDF for free.

ANAVI Miracle Controller is an open source hardware development board for simultaneously managing a couple of 5V or 12V addressable (digital) LED strips. Furthermore you can attach to it mini OLED display and up to 3 I2C sensor modules. The default firmware is available as an Arduino sketch at GitHub. Out of the box it is compatible with the popular open source automation software Home Assistant over the machine-to-machine protocol MQTT.

Right now we are running a crowding campaign at Crowd Supply to fund mass manufacturing of ANAVI Miracle Controller.  We hope you’ll jump in and help us develop further this entirely open source project!

You may also like

ANAVI Miracle Controller

ANAVI Miracle Controller is an open source hardware Wi-Fi development board powered by the ESP8266 and designed to control two 5 V or 12 V addressable LED strips simultaneously.

ANAVI Miracle Controller supports popular addressable LEDs including Neopixel, WS2811, WS2812B, TM1809, etc. It also has a dedicated slot for a mini OLED I²C display and slots for up to three additional I²C sensor modules. The default firmware is available at GitHub as an Arduino sketch implementing Home Assistant MQTT Light component.

Back in 2018 we created ANAVI Light Controller for low-cost 12V RGB LED strips. Inspired by a lot of people asking for open source hardware dev board for addressable LEDs strips we created ANAVI Miracle Controller.

Last week we launched a crowdfunding campaign for ANAVI Miracle Controller at Crowd Supply. Learn all the details here. We are ready for manufacturing and now we need your support. We hope you help us bring this entirely open source project to life!

You may also like

Sunrise Simulator Alarm Clock with ANAVI Light Controller

ANAVI Light Controller is a certified open source hardware WiFi dev board for controlling a 12 V RGB LED strip. Furthermore it has 3 slots for attaching I2C devices, for example sensors for temperature, humidity barometric pressure, light, mini OLED display, etc.

ANAVI Light Controller was the first board that we releases with ESP8266 microcontroller. We started manufacturing after a successful crowdfunding campaign at Crowd Supply. Now, with Crowd Supply we are running a contest in our open source community. Anyone who shares his experience with our products wins a $25 Crowd Supply credit and enters a random prize drawing for more of our cool open source hardware!

Jonathan Lister entered the contest and shared his amazing project for sunrise simulator alarm clock with ANAVI Light Controller. He wrote an open source command-line JAVA applications that runs on his Raspberry Pi and send commands to ANAVI Light Controller over the machine to machine protocol MQTT.

The hardware required for Jonathan’s project includes a Raspberry Pi, ANAVI Light Controller, 12V RGB LED strip, appropriate power supplyies and appropriate lamp. Jonathan used IKEA Holmo floor standing lamp and placed RGB LED strips around a suitable tube inside it. The software requirements are JAVA 8 or above as well as an MQTT broker, for example the free and open source mosquitto.

The end result looks gorgeous! Furthermore, Jonathan has shared his source code and a few photos (also used in this article) in GitHub under Apache License 2.0 license. Don’t hesitate and give a star to the project in GitHub!

If you have also done an awesome project with any of our open source hardware boards at Crowd Supply, now is the best time to share your experience and enter the contest!

You may also like

Share Your Experience to Win!

Together with Crowd Supply we successfully completed several crowd funding campaigns over the past two years. Thanks to these efforts people all over the world are using our open source hardware developer boards and kits for their awesome projects.

Do you have a cool project with any of our products? Would you like to share your story?

No matter what you did, Crowd Supply and we would like to learn more. Send a Field Report of 100 words or so along with any supplemental pictures or other resources. If it is suitable, Crowd Supply will publish it as an update and reward you with a $25 Crowd Supply credit! Furthermore, all publishable entries received before Nov. 15 will be entered into a random prize drawing for more cool ANAVI gadgets:

  • 1st prize: ANAVI Miracle Controller and ANAVI Light Controller
  • 2nd prize: ANAVI Infrared pHAT and ANAVI Play pHAT
  • 3rd prize: ANAVI Thermometer

Please submit your entries here. May the open source be with you!

You may also like