Do you remember our tiny keyboard with just 2 keys called ANAVI Macro Pad 2? Recently AE Chadwick used ANAVI Macro Pad 2 in his amazing home automation control center for his 1939 Minimalist Cottage.
ANAVI Macro Pad 2 in a Home Automation Control CenterANAVI Macro Pad 2 mounted below a Stream Deck
AE Chadwick ran new wiring straight up into the ceiling and through one wall to connect to his home media server. Stream Deck is the primary interface and ANAVI Macro Pad 2 fits below it. Our open source hardware 2-key keyboard has a simple but important task in this complex setup to perform the feature ” “tap any key to wake the computer.”
3D printed parts to hold ANAVI Macro Pad 2
AE Chadwick also designed a panel cut with CNC and 3D printed parts to hold the electronic gadgets. He was kind enough to share his experience in a Crowd Supply Field Report.
AE Chadwick, thank you for using ANAVI Macro Pad 2 and for sharing details about your project with us! It looks amazing!
ANAVI Macro Pad is an open source, programmable two-key mechanical keyboard with backlighting. It was funded through a crowdfunding campaign at Crowd Supply.
ANAVI Macro Pad 2 Developer Kit does not require soldering. The assembly is easy, please take a look at the assembly video above for details. Although you can complete assembly with your bare hands, you might find a screwdriver and tweezers helpful.
ANAVI Macro Pad 2 Developer Kit includes a fully-soldered gold-plated green printed circuit board with two Gateron red mechanical switches, red 3 mm LEDs, an acrylic enclosure in two parts, two translucent keycaps, M2.5 screws, washers, and nuts, and awesome stickers!
Peel off the protective films from both sides of the acrylic enclosure parts.
Assemble the top acrylic enclosure using two longer screws. It is not symmetric, so please pay attention to the position of capacitor C1.
Assemble the bottom acrylic enclosure using six nuts, three washers, and the shorter screw which is for the mounting hole between the two mechanical switches.
Stick the eight silicon protective pads onto the bottom: add two of them on top of each other to all four corners of the bottom acrylic plate.
Optionally, add stickers to the translucent keycaps.
Press the translucent keycaps onto the mechanical switches.
Finally, gently plug in a USB to microUSB cable and connect the ANAVI Macro Pad 2 to a personal computer. Please be careful with the microUSB connector, because harsh bending of the USB cable may damage it.
More details are available in chapter 2 of the user’s manual. As an open source project, we always welcome contributions and, if you like, you can help up improve the documentation by submitting a GitHub pull request or providing us with feedback over email. Thanks again for supporting this entirely open source project!
Good news: recently we received all required screws, nuts and washers for ANAVI Macro Pad 2. Each kit will include:
M2.5 8mm screw
2 x M2.5 12mm screws
8 x M2.5 nuts
3 washers
All of these fasteners are required for the assembly of the printed circuit board to the acrylic enclosure.
In the meantime, the Crowd Supply team has arranged all the paperwork for ANAVI Macro Pad 2 shipment following the crowdfunding campaign. We have already flashed the firmware and tested the majority of the boards. The plan is to package all units and ship them to Crowd Supply’s warehouse in 2-3 weeks. We will keep you updated. Thank you again for supporting ANAVI Macro Pad 2!
ANAVI Macro Pad 2 with all stickers which are part of the crowdfunding campaign stretch goals.
Having met the stretch goals means all kits will include 32 awesome transparent Emoji stickers. You can put them on any side of the translucent keycaps. It is entirely up to you to decide whether to use the stickers and on which keys to put them. This way you can customize your ANAVI Macro Pad 2 with its own unique look!
These transparent Emoji stickers feature icons from Font Awesome, available under CC BY 4.0 License in GitHub. Thank to our trusted local supplier in Plovdiv, Bulgaria they are printed on a glossy transparent foil and laser-cut in rectangular or square shapes, depending on the icon dimensions and proportions. We already have experience with the same stickers because they are also part of the ANAVI Macro Pad 8 kits.
In addition, ANAVI Macro Pad 2 includes logo stickers for ANAVI Technology and KiCad, the free and open source CAD software we used to design the printed circuit board for ANAVI Macro Pad 2.
Meet ANAVI Macro Pad 2! It is an open source, programmable two-key mechanical keypad with backlighting. Each of the keys on ANAVI Macro Pad 2 can be reprogrammed for use as a macro or even as a dedicated shortcut key, making it perfect for a number of applications across various industries.
ANAVI Macro Pad 2
ANAVI Macro Pad 2 runs on a Microchip ATtiny85, which is a reliable, low-cost, 8-bit AVR RISC-based microcontroller. It has a gold-plated printed circuit board, Gateron red mechanical switches, 3mm red LEDs and translucent keycaps.
Gateron red mechanical switches with 3mm LEDs on ANAVI Macro Pad 2
Only free and open source software tools like KiCad, OpenSCAD, and Inkscape were used to design ANAVI Macro Pad 2. Quantum Mechanical Keyboard (QMK) with V-USB is the default open source firmware. Source code and schematics are available on GitHub.
ANAVI Macro Pad 2 with stickers on the translucent keycaps of the mechanical switches
