“Spiderman” Raspberry Pi with ANAVI Infrared pHAT

Jesús Figueres, a data scientist interested in artificial intelligence (AI), shared in Twitter his setup of Raspberry Pi and ANAVI Infrared pHAT. It is living upside down on his lab’s ceiling so he calls it “Spiderman”. No doubt this is a suitable name in this case!

Jesús has attached various sensors for collecting data as we as a Raspberry Pi camera to take pictures of the room. He has developed energy efficiency algorithms running in the cloud which make decisions based on the data from the sensor and after that ANAVI Infrared pHAT takes care for transmitting commands as a stream of infrared signals to his air conditioner.

ANAVI Infrared pHAT
ANAVI Infrared pHAT

ANAVI Infrared pHAT is a low-cost open source hardware add-on board for Raspberry Pi with infrared receiver and transmitted. Furthermore it has slots for attaching up to 3 I2C sensor modules as well as convenient UART pins. We launched it in 2017 and it is one of our best-selling products. ANAVI Infrared pHAT is available at our distributors around the world and you can order it to build a similar home automation solution.

You may also like

Remote HVAC Control with ANAVI Infrared pHAT


Morten Mathiasen,  a highly skilled professional with 25 years of experience in software development and teaching, implemented an open source solution for HVAC control with Raspberry Pi, HTU21D temperature and humidity I2C sensor module as well as our open source hardware ANAVI Infrared pHAT. He recently shared details in a Crowd Supply Field Report.

Raspberry Pi 4 with ANAVI Infrared pHAT and HTU21D I2C sensor module

To save energy and to reduce global warming in his vacation house, Morten turns off the Panasonic HVAC system when his family is not there. Unfortunately, as a result next time when he arrives at the vacation house, it is too cold in the winter and too hot in the summer. It then takes up to 24 hours to get a comfortable temperature in the house.

Controlling the Panasonic HVAC through infrared signals and Home Assistant thanks to ANAVI Infrared pHAT and a Raspberry Pi

To solve this problem, Morten wrote in the C programming language a Home Assistant-based system that uses a Raspberry Pi with ANAVI Infrared pHAT to make an internet-connected remote control. Now, he can turn on the system remotely 24 hours before arriving to ensure a comfortable temperature.

Morten shared the source code under MIT License in GitHub. Give a star to the GitHub repo and spread the word about his fascinating open source project!

You may also like

Unifying Remote Controls with Infrared pHAT

Recently Michel submitted a very interesting Crowd Supply Field report about his awesome project with ANAVI Infrared pHAT. He used a Raspberry Pi Zero W and ANAVI Infrared pHAT to consolidate all the remote controls (TV, DVD, cable box, etc.) in his household to a single interface available on a tablet or smartphone.

Web interface for controlling remote controls over the web with Raspberry Pi, ANAVI Infrared pHAT and LIRC

Michel runs a local Apache2 web server on the Raspberry Pi Zero W and the Infrared pHAT can record and play back the infrared signals from any brand of remote control using the popular open source software Linux Infrared Remote Control (LIRC). He shared details in Crowd Supply and GitHub.

Furthermore Michel crafted a fantastic wooden box and shared with us a couple of photos!

Wooden box for Raspberry Pi Zero W and ANAVI Infrared pHAT
Inside the wooden box the two infrared LEDs have been carefully extended with appropriate wires

You may also like

ANAVI Infrared pHAT with Raspbian Buster

ANAVI Infrared pHAT is an open source hardware add-on board that converts your Raspberry Pi into a smart remote control that can bring your old consumer electronic devices, like air conditioning, TV, set top boxes and Hi-Fi systems to the Internet of Things (IoT) era.

Continue reading “ANAVI Infrared pHAT with Raspbian Buster”

You may also like